Automotive Wiper Parts

View:

Aluminum Casting Wiper Mount Adapter
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 300000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Aluminum Casting Wiper Mount Adapter is a small part which is used as Mount head on windscreen wiper system. The technology for this part is high pressure die casting. Our factory specializes in this industry for more than 16 years. The material for this part is ADC-12, a most common aluminum alloy in die casting...

Contact Now
Die Casting Aluminum Mounting Head
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 300000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
The Die Casting Aluminum Mounting Head, the part is small, but similar to the other mounting head parts, it has a deep cavity, which is easier to make the part sticky to the mold, then during production, if the material sticked on the mold is not cleaned, it will damage the castings newly produced, so in the...

Contact Now
Aluminum Die Casting BNK Knead Knock -YL102
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 150000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Aluminum Die Casting BNK Knead Knock -YL102, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...

Contact Now
Aluminum Die Casting Middle Bracket in wiper-A380
- Brand: NONE
- Packaging: carton, pallet
- Supply Ability: 180000/MONTH
- Min. Order: 1000 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Aluminum Die Casting Middle Bracket in wiper-A380 is a part applied to wiper system, with the purpose to make the stability, the comfort, the safety of driving best. The part is auto part for famous motor corporation Chrysler-Fiat, so the development is strict, prior to mass production, the customer request to develop...

Contact Now
Aluminum Die Casting Housing of Pivot Side
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Housing of Pivot Side, the part is a pivot side housing, similar to the pivot housing 421-1034 and 421-1035, this pivot side housing have two long threaded pillars, from these two pillars, there to be two shaft assembled. then with a mating motor side housing, the DC motor work inside the...

Contact Now
Aluminum Die Casting Assembled Mounting Head
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 60000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Assembled Mounting Head, this part is a assembly part with a few components, it is used on the windscreen wiper system, the body of the part is produced by high pressure die casting, the carried die casting criterion for this part is Grade GB-CT4, the part is made up of 5 parts, a M8*1.25 nut, a...

Contact Now
Aluminum Alloy Drive Arm Crank
- Brand: NONE
- Packaging: carton, PE pallet, plastic pass box
- Supply Ability: 210000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Alloy Drive Arm Crank, through the review to the geometry and the required dimensions and tolerances from the print, we will all find this part is simple, the part is used as driven arm crank on the windscreen wiper, the carried die casting criterion for this part is Grade GB-CT4, in application, the part...

Contact Now
High Precision CNC Machining Pivot Housing YL102
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Threaded Pivot Housing of Aluminum, the Wiper Mounting Head part is a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part looks almost the same to the part number L017200. The most important point to ensure the quality control for this part is the two long pillars,...

Contact Now
Aluminum Die Casting Wiper Motor Housing
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 150000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Wiper Motor Housing, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is very...

Contact Now
Threaded Pivot Housing of Aluminum
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: ISO/TS16949:2009
Threaded Pivot Housing of Aluminum, the part is also a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part looks almost the same to the part number 421-1040 except the length of the two threaded pillar. It is almost 50 mm longer than pivot 421-1040. The most important...

Contact Now
High Precision CNC Machining Pivot Housing A380
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Double Shaft Pivot Housing, the part is also a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part is similar to the pivot housing 421-1034 but have two long pins, this pivot side housing have two long threaded pillars, from these two pillars, there to be two shaft...

Contact Now
Aluminum Die Casting Mount Bracket of Swing Arm
- Brand: NONE
- Packaging: Carton, PE pallet, Wooden Pallet, Steel Box, Plastic recycle box
- Supply Ability: 45000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Mount Bracket of Swing Arm, it is a part used on wiper system, the manufacturing technology is High Pressure Die Casting, a kind of cold chamber aluminum die casting, the material for this part is ADC-12, a Japanese standard aluminum. this material is supposed to conform to standard of JIS H...

Contact Now
Aluminum Die Casting Mounting Bracket
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 50000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Mounting Bracket, this part carried die casting standard of Grade GB-CT4, the part has small wall thickness, meanwhile, the part have structure of big cavity, which usually easily cause problem of mold sticking, pull mark etc. The small wall thickness means the part probably happen to deform...

Contact Now
Aluminum Die Casting Arm Channel
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Arm Channel, the part is a bracket for passing and fixing the wire of the windscreen wiper, the standard carried for the die casting work of this part is GBT6414-CT4, this part has a lot of hollow-out structure, which need not only one slide to form. This part has a cylinder structure of φ15.7 mm,...

Contact Now
Aluminum Die Casting Shaft Housing
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 90000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Shaft Housing, This part is a pivot housing for assembling the shaft, which is used on DC motor on wiper system, the part is very similar to pivot housing 421-1034, the difficulty of this part is the feature of the long threaded pillar, it is even longer than 421-1034, the length is up to 115 mm,...

Contact Now
Auto precision cnc Pump parts
- Brand: NONE
- Packaging: carton, PE pallet, PE pass gate, wooden pallet
- Supply Ability: 70000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Auto Precision CNC Pump parts. the material of this part is ADC-12, the part is a housing for Pump system which is used on car. About Auto CNC Pump part .It is the irregular and complex . During the production. not only pay attention to the products' quality. Also should pay attention to staff training in the...

Contact Now
Aluminum Die Casting Motor Side Housing
- Brand: NONE
- Packaging: carton, PE pallet, PE pass gate, wooden pallet
- Supply Ability: 70000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Motor Side Housing, the material of this part is ADC-12, the part is a housing for DC motor on windscreen wiper system which is used on bus, boat after assembly, the part is an end cover, work with a mating pivot housing, the DC motor run in these two housing. On this part, there are a lot of...

Contact Now
Aluminum Die Casting Drive Arm Crank
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 210000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Drive Arm Crank, this part is used as driven arm crank on the windscreen wiper, the carried die casting criterion for this part is Grade GB-CT4, in application, the part will rotate with the driven structure of the wiper, so the mechanical property should at least satisfy tens of thousands of...

Contact Now
Aluminum Die Casting BNK Knead Knock -AlSi9Cu3
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 150000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Aluminum Die Casting BNK Knead Knock -AlSi9Cu3, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...

Contact Now
Aluminum Die Casting of Motor Side
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Housing of Motor Side, the part is a housing for DC motor on windscreen wiper system which is applied to bus, boat in daily life, the part is a cover, the mating part is the pivot housing 429-1040, in this part, there is a feature of rail, which is used for the slide of a mating plastic part, so...

Contact Now
Casting CNC Machining Pivot Housing A380
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 30000/MONTH
- Min. Order: 1500 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Threaded Pivot Housing of Aluminum, the Wiper Mounting Head part is a kind of pivot housing on windscreen wiper system, which is applied to bigger buses, boat etc. The part looks almost the same to the part number L017200. The most important point to ensure the quality control for this part is the two long pillars,...

Contact Now
Tubular System Die Casting Bracket
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 50000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Tubular System Die Casting Bracket, this part is very similar to the Aluminum Die Casting Mount Bracket 306-1235, another type, the two parts almost have the same characteristics. so the difficult points of Aluminum Die Casting Tubular System Bracket is the same as the 306-1235, the part also implement die casting...

Contact Now
Aluminum Die Casting Pivot Housing
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 120000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: ISO/TS16949:2009
Aluminum Die Casting Pivot Housing, our factory have a couple of 280T die casting machines, the size and the weight of this part is very suitable for the machines. This part is a pivot housing for DC motor on wiper system, the difficulty of this part is the structure of the long threaded pillar, the length is more...

Contact Now
Aluminum Die Casting BNK Knead Knock Case-ADC12
- Brand: NONE
- Packaging: carton, PE pallet
- Supply Ability: 150000/MONTH
- Min. Order: 2000 Piece/Pieces
- Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Aluminum Die Casting BNK Knead Knock -ADC12, it is a new part developed, the part is the major housing for the DC motor of the windscreen wiper. the cavity number for this part is 2, according to the required tolerance and dimensions, the difficult point of this part is the CNC machining work, the wall thickness is...

Contact Now

China Automotive Wiper Parts Suppliers

Automotive Wiper Parts is used on windscreen wiper system on automotive. it is one of the most important safety devices. It can make sure to remove the raindrops while driving in rainy days or remove snow while driving in snowy days, or remove the muddy water splashed on the windshield while driving on the muddy road, to promise the drivers to have good sight line so that the driving can be safe.

Wiper system is mainly composed of wiper arm assembly, wiper linkage, wiper brush, washing pump, liquid storage pot, fluid tube, nozzle etc. The Main function includes single step, intermittent shave, slow wiping, fast wiping and water spray.

New Products